Snap-on provides specs for portable plasma cutters

4251

Snap-on Industrial’s portable plasma cutters can cut up to 3/4” thickness on a variety of ferrous, non-ferrous and high-strength materials.

Users can adjust the depth of the cut, so the top layer can be cut without disturbing the base layer.

Snap-on’s model Plasma20i (pictured) can cut to a thickness of a quarter inch. (Courtesy: Snap-on)

Performance specs for the cutters include:

  • PLASMA20i
  • Maximum output amps: Adjustable 5-20
  • Cut thickness: 1/4”
  • Sever thickness: 3/8”
  • Primary input (Volt AC): 115
  • Primary input: 20 A
  • Duty cycle rating: 100% at 15 A
  • Minimum compressed air requirements: 50 PSI at 5 CFM
  • Torch and ground cable lengths: 12’
  • PLASMA30i
  • Maximum output amps: Adjustable 5-25
  • Cut thickness: 3/8”
  • Sever thickness: 1/2”
  • Primary input (Volt AC): 115 or 230
  • Primary input: 30 A 115 V or 20 A 230 V
  • Duty cycle rating: 60% at 22 A
  • Minimum compressed air requirements: 50 PSI at 7 CFM
  • Torch and ground cable lengths: 12’
  • PLASMA60i
  • Maximum output amps: Adjustable 20-55
  • Cut thickness: 3/4”
  • Sever thickness: 3/4”
  • Primary input (Volt AC): 208/230
  • Primary input: 40 A
  • Duty cycle rating: 60% at 40 A
  • Minimum compressed air requirements: 68 PSI at 7 CFM
  • Torch and ground cable lengths: 18’

More info b2b.snapon.com/